Automobile Equipments

Verizone Truck and Bus Mobile Aligner

First Wireless System Provides Flexible Calibration Free Installation

Specifications

Wheel Adaptors & Targets

Lightweight and compact design of adaptors and targets. Self-centering 16"-28" rim range wheel adaptors with an adjustable central carriage are compatible with most heavy-duty vehicles. Double-sided extended heavy-duty vehicles easy attachment to both steel and light-alloy rims.

High definition targets are coated with a protective layer and contain no electronic components. A super-light FR 4 alloy target base is used. Target corner plastic frame for outstanding protection against drops and other impacts. Constructed from impact-resistant polycarbonate and double-enforced with a shock-absorbing rubber inner sleeve.

Two adjustment baselines are supported references defining a centerline through the center of the frame. The rear axle thrust angle, the scrub angle of the subsequent axles, and the total toe-in of the front axle are adjusted relative to the selected baseline.

Probe Target

A mechanical or electronic laser probe accurately calculates the frame position of the wheels' or semi-trailer axle. This option allows the alignment procedure to be carried out almost as quickly as the measurement relative to the vehicle centerline.

This machine is installed with an individual battery pack for low power consumption, high speed, signal.

Product Introduction

• High definition high speed industrial digital camera
• Fast, simple, friendly interface
• Set-up to reading under two minutes
• Non-electronic wheel sensor targets
• Live view of all alignment angles at working lift heights
• 3-D overall image with measured data

Standard Configuration Measurement

• HD Camera-2
• Target-4
• Wheel Clamp and Base
• PC, Monitor, Keyboard, and Mouse
• Turn Plate-2
• 3D Alignment Software
• Column
• Brake Peddle
• Steering Wheel Holder
• Hub Board with Cables (Optional)

Measures: TOE, Camber, SAI, Caster, Thrust Angle, Wheel Base, Track Wide, Setback

Accuracy

Data Bank with complete vehicle specification for vehicles of different make, can be upgraded with user-entered new data.

Ultimate

Features & Benefits

• Compatible Wheel Alignment for PIT and lift construction (Scissor lift and Four post lift).
• Optional: Automatic tracking camera boom depending on the vehicle heights.
• Wider wheel clamp 11" to 24".
• User-friendly graphical user interface software for technician.
• High quality Vidal design cabinet.
• High resolution HD Camera/XD Camera.
• High durability Aluminum turn plates.
• Wheel base up to 4 meters.
• Option for selection of vehicle specification during alignment.
• Waterproof & dustproof, lightweight target.
• Voice over notification during alignment operation.

Auto Camera Tracking

Automatic camera tracking eliminates the need to readjust the camera after raising on the two post lift, ensuring ultimate accuracy while moving the full machine on wheels at multiple bays.

Ultimate XD/TPL

Features & Benefits

• All-in-one compatible wheel aligner for 2 Post lift, 4 Post lift, Wheel Alignment Scissor lift, Double Scissor Lift, and PIT.
• Suitable for space-constrained workshops having one bay but two service requirements (Wheel Alignment and under chassis service).
• Portability option for moving the Camera beam from one wheel alignment bay to another.
• Dedicated Alignment bay not required, it serves for both Wheel Alignment and under chassis service.
• In-built voice over notification during Wheel Alignment.
• Eliminates the necessity of PIT civil work construction in wheel alignment workshops.
• User-friendly Software interface for technicians.
• XD camera XD targets for Ultimate XD model.

Superior Performance, Exceptional Value

Optional: High quality XD Targets with High quality of Clamps.

T 20

Technical Features

• Swing horizontal arm with 36 mm hexagon shaft.
• Pneumatic locking and Round pole adjustment of mounting arm.
• Tools head with interchangeable plastic inserts for rim protection.
• Self-centering four-jaws with double pneumatic cylinder for secure clamping of all rim types.
• Powerful clamping cylinders provide uniform clamping pressure.
• Clockwise and Anticlockwise rotation of the turntable through electric motor.
• The pedal assembly can be removed allowing easy servicing.
• Inflation gun with pressure gauge and pressure release button.
• Protection kit for bead breaker shoe, demounting head, and clamping jaw comes standard.
• Complete with lubrication filter and pressure regulator.

T 2600 (Truck & Bus Tyre Changer)

Product Description

Automatic Tyre Changer with clockwise & anticlockwise rotation of chuck, locking jaws with different gripping possibilities, hydraulic motor with pressure regulating device, and Italian pump.

Technical Details

T 705/T 705H

Technical Features

• Automatic tyre changer with pneumatic tilt-back tower.
• Robust 41 mm hexagon shaft.
• Simultaneous pneumatic locking of the horizontal and vertical arms with automatic positioning of the head in the optimal work position.
• Tools head with interchangeable plastic inserts for rim protection.
• Pneumatic tilting arm support column featuring high torsional rigidity in all operation positions.
• Clockwise and anticlockwise rotation of the turntable through electric motor.
• The pedal assembly can be removed allowing easy servicing.
• Protection kit for bead breaker shoe, demounting head, clamping jaw, and lever comes standard.
• Independent tire inflation bay with inflation tube, pressure gauge, and pressure release button.

T 705H DP20 Helper Arm

• Rotating arm with bead pressing block for drop-center rims, to assist fitting and removal of tyres, particularly low profile tyres.
• Rim pressing cone for assisting wheel clamping.
• Tyre lifting disk to aid in demounting difficult tyre and wheel combinations.
• Mid-position roller helps loosening of the second bead.

T 705 Technical Details

Stainless tool head with interchangeable plastic inserts to protect rims. Powerful bead breaker with 2700 kg capacity.

B 70

Specifications

Technical Features

• Manual measuring of wheel diameter and distance.
• Various programs selectable: Static, Alu1, Alu2, Alu3, etc.
• Spin unit with 36 mm balancing shaft and anti-rust alu-alloy belt pulley ensures maximum reliability.
• Precise Alu-alloy distance gauge with weight holder ensures more accurate measurement.
• Integrated calibrate and self-diagnostic program.
• Auto or manual start when hood is lowered.
• Selection of millimetre/inch and ounce/gram.

B 100 (Truck & Bus Wheel Balancer)

Specifications

Standard Accessories

• Weight Plier
• Weight
• Tire Protective Cover (Optional control for starting/stopping)
• Optional Motorcycle Accessories for dynamic balance measurement

Technical Features

• Electronic microprocessor controlled wheel balancer for balancing car, motorcycle, and light industrial vehicle wheels.
• Control panel with digital display and durable key buttons.
• Automatic distance, diameter, and width data entry.
• Automatic start by lowering wheel guard.
• Automatic braking of the wheel after measurement.
• Wheel locking with Quick nut.
• Self-calibration and self-diagnosis programs.
• Wheel dimensions shown in inches or millimeters.
• Indication of unbalance in grams or ounces.
• Alu programs and motorcycle programs.
• Optimization mode for rim/tyre matching.
• Hidden weight program.

Technical Details

40 mm High precision Balancing shaft. All Automatic Measurement gauge; A/D/H automatic input. Laser indication at 6 o'clock position. The balancer includes all measurement modes including dynamic balance, static balance, 5 ALU balance customized ALUS, and customized OPT function and 2 counterweight split hidden function.

Standard Accessories

• Ultrasonic Sonar Sensor
• Control panel B980vi
• Set of Weight Plier Pressure Cup 100g
• 4 x cones with Rubber Weight Protector
• Width Caliper
• Quick Nut
• Cone Spring

Clean Air Services provides spare parts for wheel alignment, wheel balancer, and tyre changer machines.

Contact us for more details on available spare parts.

Double Piston Pump K497E

Details for Double Piston Pump K497E are available upon request.

Single Piston Pump S460

Details for Single Piston Pump S460 are available upon request.

IP Series - KS 1114

• Maximum Pressure: 110 bar/1600 psi
• Flow Rate: 14 Lpm
• Motor Power: 2.4 kW / 3.2 hp
• Single Phase: 220 volt / 50 Hz
• Speed: 1450 rpm
• Pressure Washer Gun
• Pressure Washer Nozzle x 4
• Inlet Hose with Filter
• Output Hose: 10 meters
• Auto Stop

DL Series - KS 1710

• Maximum Pressure: 170 bar/2465 psi
• Flow Rate: 10 Lpm
• Motor Power: 3 kW / 4 hp
• Single Phase: 220 volt / 50 Hz
• Speed: 1450 rpm
• Pressure Washer Gun
• Pressure Washer Nozzle x 4
• Inlet Hose with Filter
• Output Hose: 10 meters
• Auto Stop

BIK Series - KS 2413

• Maximum Pressure: 240 bar/3480 psi
• Flow Rate: 13 Lpm
• Motor Power: 5.5 kW / 7.5 hp
• Three Phase: 380 volt / 50 Hz
• Speed: 1450 rpm
• Pressure Washer Gun
• Pressure Washer Nozzle x 4
• Inlet Hose with Filter
• Output Hose: 10 meters
• Auto Stop

A Series - KS 1714

• Maximum Pressure: 170 bar/2465 psi
• Flow Rate: 10 Lpm
• Motor Power: 3 kW / 4 hp
• Three Phase: 380 volt / 50 Hz
• Speed: 1450 rpm
• Pressure Washer Gun
• Pressure Washer Nozzle x 4
• Inlet Hose with Filter
• Output Hose: 10 meters
• Auto Stop

The MDA is designed for use in vehicle workshops and service centres. Suitable for all sizes of pneumatic tyres including trolleys, bicycles, cars, and trucks.

Airtec 89XDH

The Airtec 89XDH is a versatile and accurate digital inflator designed specifically for inflating high pressure tyres used by the aviation industry. Utilising Airtec's proven digital inflation technology, the 89XDH boasts an accuracy of ±0.5% full scale, is factory calibrated to ISO/IEC 17025.

Technical Features

• Designed for continuous duty.
• Deep finned cast iron cylinders, aluminium cooler tubes ensuring superior heat dissipation for higher operating efficiency.
• Aerodynamically designed fan with large blades for higher air flow.
• Efficient cooling to ensure operation at higher ambient temperatures of up to 50°C.
• Totally enclosed belt guard for utmost safety.
• Optimal distribution of load on cylinders for energy efficiency (Two stage models).
• Long life of motor due to no-load starting ensured by built-in unloader.
• Sturdy, robust cast iron crankcase.
• Forged steel crankshaft supported at both ends for higher dynamic stiffness and least vibrations.
• Optimal operating speed for longer service life.
• Pressure relief valve provided after each stage of compression for safety.
• Convenient oil sight glass and oil drain.
• Stainless steel valves for lower wear and lasting compression efficiency.
• Efficient air filter to ensure clean intake air for long service life.

Technical Specifications

• Lifting Capacity: 4 Tons
• Lifting Height: 5 Feet 1 Inch
• Minimum Height: 3 Inch
• Motor: Three Phase / Single Phase
• Dimensions (L x W x D): 105 x 42 x 3 Inch
• Gross Weight: 385 Kgs

Also available in 6 Ton to 12 Ton capacities.

Model: Power

Most ideal alternative for car washing, saving hassles of fixing Single Post Washing Lift. No civil work required. No need for an air compressor. Only 10 liters of oil required. Can be used for various reasons like changing oil, changing tyres, movement of parked vehicles, underbody inspection, etc. Suitable for wheel service jobs. Operates through a portable hydraulic power pack. Made of extruded steel tubes, powder-coated, low maintenance, high productivity. Portable design with safety locks for various heights, MS check plates, and equipped with 2 hydraulic cylinders.